Ricoh SP 200 소프트웨어 설치 매뉴얼 - 페이지 8

{카테고리_이름} Ricoh SP 200에 대한 소프트웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh SP 200 21 페이지. Software installation guide
Ricoh SP 200에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (2 페이지), 빠른 설치 매뉴얼 (2 페이지), 빠른 설치 매뉴얼 (2 페이지)

Ricoh SP 200 소프트웨어 설치 매뉴얼
Printing a network setting list
Before you install the software, print the network setting list to check the network information.
It can take up to two minutes to print the network setting list.
Printing a network setting list
SP 200N, 201N
1.
Continue to press the [Start] key.
SP 202SN, 203SFN, 204SFN, 204SN
1.
Press the [User Tools] key.
2.
Press the [ ] or [ ] key to select [Print List/Report], and then press the [OK] key.
3.
Press the [ ] or [ ] key to select [Network Setting List], and then press the [OK]
key.
Checking a network setting list
MAC address
This is a unique address identifying the hardware.
IPv4 Configuration
You can check the IP address.
If using a DHCP server:
You can check the IPv4 address automatically assigned by a DHCP server.
If the IPv4 address is not automatically assigned by the DHCP server:
If the IPv4 address is not automatically assigned by a DHCP server, the machine automati-
cally selects an unused IPv4 address starting with "169.254.xxx.xxx" (AutoIP function).
IPv6 Configuration
You can check the Link-local address.
CTT175
8