Epson ELP-3300 - Data/Video Projector 제품 정보 - 페이지 2

{카테고리_이름} Epson ELP-3300 - Data/Video Projector에 대한 제품 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ELP-3300 - Data/Video Projector 2 페이지. Product support bulletin(s)
Epson ELP-3300 - Data/Video Projector에 대해서도 마찬가지입니다: 간편한 설정 (1 페이지), 사용자 설명서 (1 페이지), 기술 요약 (7 페이지), 제품 지원 게시판 (9 페이지), 사양 (1 페이지)

페이지 인쇄

EPSON ELP-3300 Data/Video Projector

Status Lights

The status lights at the top of the projector monitor its

operation.

temperature light 1

lamp light

To reset the lamp indicator after replacing the bulb, turn off

the projector, hold the 'Menu" and 'Sync-" buttons down

then turn the power switch back on. Continue to hold the

buttons down until all three monitor lights flash orange for

about 3 seconds. The lamp dectector is now reset.

Pin Assignments

The following tables describe the pin assignments for the

three connectors of the Y-cable: the LCD connector, the VGA

connector, and the Monitor connector. The pin assignments

for the VGA and Monitor connectors are identical.

LCD connector pin assignments

The LCD connector is a 26-pin D-style connector. Its pin

assignments are as follows:

ELP-3300 - 2

power light

VGA and Monitor connector Pin assignments

The VGA connector is a male video RGB, 15-pin micro-D

style connector, and the Monitor connector is a female video

RGB, 15-pin micro-D style connector. The pm assignments