Cisco Webex 860 매뉴얼 - 페이지 11

{카테고리_이름} Cisco Webex 860에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Webex 860 12 페이지.
Cisco Webex 860에 대해서도 마찬가지입니다: 설정 (10 페이지), 빠른 참조 매뉴얼 (3 페이지), 문제 해결 매뉴얼 (6 페이지), 매뉴얼 (36 페이지), 빠른 참조 매뉴얼 (3 페이지)

페이지 인쇄

Phone Setup

Configure a TFTP Server

You must configure a TFTP server if your network doesn't provide DHCP option 150 or 66 for the Cisco

Unified Communications Manager that you want to register to.

Note

Configure the DHCP pool with option 150 or 66 if you want to use the automatic configuration method.

Before you begin

You need the following information:

• Local Phone Unlock Password, if the default password was updated

• IP address of the TFTP server

Procedure

Step 1

Access the Cisco Phone

Step 2

Choose one of the following based on your phone's software version:

• For release 1.2, tap the Overflow menu.

• For release 1.3 or newer, tap the Drawer

Step 3

Choose one of the following based on your phone's software version:

• For release 1.2, select Settings > Phone information > Security.

• For release 1.3 or newer, select User settings > Phone information > Security.

Step 4

Enter the Local Phone Unlock Password.

The default password is **#.

Step 5

To enable alternate TFTP servers, swipe the Alternate TFTP slider to the right

Step 6

Enter the TFTP server addresses and tap OK.

Step 7

Tap the back arrow in the upper left corner twice to save your changes and exit the menu.

app.

menu.

Configure a TFTP Server

Phone Setup