Ricoh Paper Bank PS470 설치 매뉴얼 - 페이지 2

{카테고리_이름} Ricoh Paper Bank PS470에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Paper Bank PS470 2 페이지. For machine code: g060 / g080 / g082

Slowly pull out Tray 2 while lifting up a little.

Fasten one thumb screw. A coin can be used to fasten the

screws.

Slowly slide Tray 2 back into the printer, until it stops.

Open the right cover of the 2000-sheet Large Capacity

Tray.

Hook the mounting bracket to the hole, as shown.

ZHXH851J

ZDJP021J

ZHXH070N

ZHXH080N

Printed in Japan

Fasten the bracket with the other thumb screw. A coin can

be used to fasten the screws.

Close the right cover of the 2000-sheet Large Capacity

Tray.

Stick label "3" above the handle on the front of the 2000-

sheet Large Capacity Tray.

Note

After finishing the installation, you can check the 2000-sheet

Large Capacity Tray is installed properly: Print the configuration

page from the "List/Test Print" menu. If it is installed properly,

you will see "LCT Tandem Bank" appear under the "Options"

list. (G060, G080)

After finishing the installation, you can check the 2000-sheet

Large Capacity Tray is installed properly: Print the configuration

page from the "Print Menu" menu. If it is installed properly, you

will see "LCT" appear under the "Paper Tray Information" list.

(G082)

If the paper feed unit is not installed properly, repeat the

procedure from step

. If you cannot install it properly even

after reinstallation, contact your sales or service representative.

ZDJP024J

ZDJP128J

G569-8600B