Cisco 12816 교체 지침 매뉴얼 - 페이지 9

{카테고리_이름} Cisco 12816에 대한 교체 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 12816 18 페이지. Blower module and air filter for cisco 12016, cisco 12416, and cisco 12816 router
Cisco 12816에 대해서도 마찬가지입니다: 포장 풀기 사용 설명서 (28 페이지), 데이터시트 (9 페이지), 사용 설명서 (16 페이지), 교체 지침 매뉴얼 (32 페이지)

페이지 인쇄

Lift up the air filter and carefully slide it out the door

Step 2

Caution

Be careful not to damage the honeycomb screens on the back of the air filter door and in

the fabric card cage. Damage to the honeycomb screens can restrict airflow, cause

overheating, and affect EMI performance.

Figure 5

Air filter

Push filter up

with palm

and fingertips

Step 3

Visually check the condition of the air filter to determine whether to clean or install a new replacement.

•

Dirty—You can vacuum or replace the filter.

Caution

Do not vacuum the air filter while it is installed in the chassis. You must remove the air filter completely

before you clean it to prevent contaminants from being drawn into the bays or cage.

Worn or torn—If the filter appears worn or torn, dispose of it in a responsible manner and install a

•

replacement air filter (ACS-GSR16-FLTR=).

78-16083-02

Removing the Chassis Air Filter

Cisco 12016, Cisco 12416, and Cisco 12816 Router Blower Module and Air Filter Replacement Instructions

Cleaning or Replacing the Chassis Air Filter

(Figure

5).