ActronAir QUE QZW-100 설치 및 사용자 설명서 - 페이지 6

{카테고리_이름} ActronAir QUE QZW-100에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ActronAir QUE QZW-100 13 페이지.
ActronAir QUE QZW-100에 대해서도 마찬가지입니다: 설치 및 사용자 설명서 (13 페이지)

페이지 인쇄

Pairing a Zone Controller

On master controller, go to 'MENU' > Settings > System Settings>

Zone Settings, then select which zone to set up.

Assign a named to the zone, then touch 'Add a zone device'.

Touch 'A new zone controller'.

Follow the on screen instructions.

Press and hold the 'Pair' button until 3 green light flashes

(on the button).

NOTE:

3 red flashes means the device failed to pair to master controller.

Retry pairing the zone controller.

If successful, master controller will show that the device is paired.

Confirm the serial number of the zone controller then touch

to accept.

NOTE:

Zone controller serial number is printed on the back of the device.

Next screen will show the paired zone controller and its

serial number.

If a remote sensor is required, repeat steps 1-6. However, at step 3

select 'A remote sensor' then follow the on screen instructions.

Welcome!

Connecting

Connected

Not Co

Device is not connected

This device is now

This device is now connected

This devic

to the AC

trying to connect

to the main controller.

to the m

to the main controller.

Please go to the main

Please return to the main

Please r

controller

to setup.

Please wait

controller

to complete setup.

control

Pair

button

Software Update

WARNING!

This device is now

This device failed to

The battery level is low.

downloading software.

update software!

Please wait...

Error code X

Please replace the batteries

Press any button to try again.

to update software.