Cisco 1751 빠른 시작 매뉴얼 - 페이지 17

{카테고리_이름} Cisco 1751에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 1751 35 페이지. Modular access router
Cisco 1751에 대해서도 마찬가지입니다: 솔루션 개요 (16 페이지), 데이터시트 (19 페이지)

페이지 인쇄

The telephone numbers used in this guide are only examples and are invalid for public use in the United

Note

States. When you configure your network, be sure to substitute your own telephone numbers.

To configure the router with the dial-peer information in

configuration commands:

West> enable

Password:

West# configure terminal

West(config)# dial-peer voice 401 pots

West(config-dial-peer)# destination-pattern 14085553737

West(config-dial-peer)# port 0/0

West(config)# dial-peer voice 402 pots

West(config-dial-peer)# destination-pattern 14085554141

West(config-dial-peer)# port 0/1

West(config-dial-peer)# exit

West(config)#

These commands are summarized in

Figure 12

The dial-peer command always takes the argument voice. The number following it is the dial-peer tag,

and pots is the type of dial peer.

Cisco IOS software refers to a telephone number as a destination pattern because it is the destination for

an incoming or outgoing call. Enter these numbers with the destination-pattern command. A

destination pattern can include asterisks (*) and pound signs (#) from the telephone keypad, and commas

(,) and periods (.), which have special meanings. Parentheses ( () ), hyphens (-), slashes (/), and spaces

( ), which are often used to make telephone numbers easier for humans to read, are not allowed.

Notice that the commands in the examples puts the prefix 1 (used in the United States to indicate a

long-distance number) and an area code in front of the remaining numbers to complete the destination

pattern. You need to include similar codes for your country if the VoIP equipment needs to establish a

connection to the PSTN.

The Cisco IOS software does not check the validity of the telephone number. It accepts any string of

Note

permitted characters as a valid number.

The business that owns the West router also has a branch office in the East.

office network, and

78-11259-05

Figure

West Router Configured for Local Dial Peers

dial-peer voice 401 pots

destination-pattern 14085553737

port 0/0

FXS VIC

0/0

West

FXS VIC

0/1

dial-peer voice 402 pots

destination-pattern 14085554141

port 0/1

Table 8

lists the phone numbers, voice ports, and dial-peer tags for this office.

Table

7, enter the following global

12.

IP cloud

Cisco 1751 Voice-over-IP Quick Start Guide

Configuring Voice-over-IP

Figure 13

shows the East