Cisco 2654T6 재포장 매뉴얼 - 페이지 19

{카테고리_이름} Cisco 2654T6에 대한 재포장 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2654T6 26 페이지. Cisco systems router owner's manual

Appendix A

Repackaging the Router

Reinstalling the Cards in the Upper and Lower Card Cages

Caution

Reinstalling the Cards in the Switch Fabric Card Cage

Replacing the Blower Modules

Reinstalling the Power Modules

OL-17440-01

If you elected to remove components from the chassis before removing it from the

rack, you must now reinstall all the components in the chassis.

Reinstall all of the cards from the upper and lower card cages in their original

slots.

Reinstall all of the cards in the upper card cage as instructed in the

•

"Reinstalling the Cards in the Upper Card Cage" section on page

Reinstall all of the cards in the lower card cage as instructed in the

•

"Reinstalling the Cards in the Lower Card Cage" section on page

Any unoccupied card slot in the upper or lower card cages must have a blank filler

panel installed for electromagnetic compatibility (EMC) and to ensure proper air

flow through the chassis. When the faceplate of a line card does not completely

fill the card slot opening, a narrow card filler panel must be installed for

electromagnetic compatibility (EMC) and to ensure proper air flow through the

chassis.

Reinstall all of the cards from the switch fabric card cage in their original slots as

instructed in the

"Reinstalling the Cards in the Switch Fabric Card Cage" section

on page

3-50.

Replace the blower modules as instructed in the

Modules" section on page

If you removed AC-input power supplies from the chassis, reinstall each power

supply as instructed in the

page

3-75.

Cisco XR 12416 and Cisco XR 12816 Router Chassis Installation Guide

3-47.

"Installing AC-Input Power Supplies" section on

Repackaging the Routers

3-52.

3-53.

"Reinstalling the Blower

A-19