Cisco 2811 - Voice Security Bundle Router 운영 - 페이지 17

{카테고리_이름} Cisco 2811 - Voice Security Bundle Router에 대한 운영을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2811 - Voice Security Bundle Router 31 페이지. Integrated services routers
Cisco 2811 - Voice Security Bundle Router에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (45 페이지)

페이지 인쇄

Cisco 2811 - Voice Security Bundle Router 운영

Figure 11 – 2811 Tamper Evident Label Placement on the Opacity Shield

For Cisco 2821:

1. Clean the cover of any grease, dirt, or oil before applying the tamper evidence

labels. Alcohol-based cleaning pads are recommended for this purpose. The

temperature of the router should be above 10 C.

2. The tamper evidence label should be placed so that one half of the label covers

the front panel and the other half covers the enclosure.

3. The tamper evidence label should be placed over the CF card in the slot so that

any attempt to remove the card will show sign of tampering.

4. The tamper evidence label should be placed so that the one half of the label

covers the enclosure and the other half covers the port adapter slot.

5. The tamper evidence label should be placed so that the one half of the label

covers the enclosure and the other half covers the rear panel.

6. Place tamper evident labels on the opacity shield as shown in Figure 14.

7. The labels completely cure within five minutes.

Figures 12, 13 and 14 show the additional tamper evidence label placements for the 2821.

This document may be freely reproduced and distributed whole and intact including this Copyright Notice.