Cisco 3745 업그레이드 지침 - 페이지 9

{카테고리_이름} Cisco 3745에 대한 업그레이드 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 3745 30 페이지. Non-proprietary security policy
Cisco 3745에 대해서도 마찬가지입니다: 솔루션 개요 (16 페이지), 빠른 시작 매뉴얼 (33 페이지), 사용자 설명서 (48 페이지), 설치 매뉴얼 (12 페이지)

페이지 인쇄

Safety with Electricity

Never touch uninsulated telephone wires or terminals unless the telephone line has been

Warning

disconnected at the network interface. Statement 1037

Do not work on the system or connect or disconnect cables during periods of lightning activity.

Warning

Statement 1001

To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network

Warning

voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some

LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Statement 1021

Warning

Hazardous network voltages are present in WAN ports regardless of whether power to the unit is OFF

or ON. To avoid electric shock, use caution when working near WAN ports. When detaching cables,

detach the end away from the unit first. Statement 1021

Warning

Connect the unit only to DC power source that complies with the safety extra-low voltage (SELV)

requirements in IEC 60950 based safety standards. Statement 1033

Follow these guidelines when working on equipment powered by electricity:

•

OL-5423-02

Locate the emergency power-off switch in the room in which you are working. Then, if an electrical

accident occurs, you can quickly shut the power off.

Before working on the router, turn off the power and unplug the power cord.

Disconnect all power before doing the following:

–

Installing or removing a router chassis

Working near power supplies

–

Performing most hardware upgrades

–

Do not work alone if potentially hazardous conditions exist.

Never assume that power is disconnected from a circuit. Always check.

Look carefully for possible hazards in your work area, such as moist floors, ungrounded power

extension cables, and missing safety grounds.

If an electrical accident occurs, proceed as follows:

Use caution; do not become a victim yourself.

–

Turn off power to the router.

–

If possible, send another person to get medical aid. Otherwise, determine the condition of the

–

victim and then call for help.

Determine if the victim needs rescue breathing or external cardiac compressions; then take

–

appropriate action.

Upgrading System Memory in Cisco 3700 Series Routers

Safety Recommendations