Cisco 3845 - Security Bundle Router 빠른 시작 매뉴얼 - 페이지 14
{카테고리_이름} Cisco 3845 - Security Bundle Router에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 3845 - Security Bundle Router 40 페이지. Integrated services routers
Cisco 3845 - Security Bundle Router에 대해서도 마찬가지입니다: 비독점 보안 정책 (30 페이지), 빠른 시작 매뉴얼 (38 페이지), 문제 해결 매뉴얼 (15 페이지)
페이지 인쇄
Figure 8
Bracket Installation for Center Mounting with Rear Panel Forward
NM -
ES W-
16
15x
Fas tEth
ern et Por
ts
7x
15x 7x
14x
6x
13x
5x
12x
4x
11x 3x
10x
2x
9x
1x
8x
0x
Left bracket
for 23-inch rack
Left bracket
for 19-inch rack
Installing the Router in a Rack
Warning
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to
ensure that the system remains stable. The following guidelines are provided to ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component
at the bottom of the rack.
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack.
Statement 1006
Be sure to leave space above and below each router in a rack, to allow for cooling air circulation.
Caution
Use two screws for each side (supplied with the rack, not with the router).
Start the lower pair of screws first, and rest the brackets on the lower screws while you insert the upper pair of screws.
Tip
Attaching the Cable Management Bracket
The optional cable management bracket provides attachment points for organizing and routing cables. Attach the cable
management bracket to the left or right rack-mount bracket using the screw provided. You can attach the cable management
bracket to either the upper or the lower threaded hole. See Figure 9 for attachment locations.
14
8x
Ext
Pwr
-48V
GE
10/1 00/
100 0
Bas e-Tx
0x
EN
Use six screws on each side.
Right bracket
for 19-inch rack
Right bracket
for 23-inch rack