Epson V11H248020 - MovieMate 30s WVGA LCD Projector 빠른 설정 매뉴얼 - 페이지 2
{카테고리_이름} Epson V11H248020 - MovieMate 30s WVGA LCD Projector에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson V11H248020 - MovieMate 30s WVGA LCD Projector 6 페이지. Product support bulletin(s)
Epson V11H248020 - MovieMate 30s WVGA LCD Projector에 대해서도 마찬가지입니다: 설정 (9 페이지), 빠른 매뉴얼 (32 페이지), 제품 지원 게시판 (4 페이지)
페이지 인쇄
2
Choose a location
You can use your MovieMate just about anywhere—in the living room, bedroom,
or even outside. You can use it with an optional subwoofer and screen, or simply
project on a wall and use the built-in audio system.
The following pictures show four different setups.
If you want an 80-inch diagonal size image, place MovieMate about
6
feet away from the wall or screen. The following diagram shows the
1
⁄
2
approximate image size (measured diagonally) at various distances.
If you want to project against a wall, choose a flat white wall with a smooth
surface for best results.
MovieMate doesn't have to be directly in front of the screen or wall, but it
has to face straight ahead (at a 90-degree angle to the projection surface).
If the image is too low, too high, or off to the side, you can use the quick
image adjustment dials to adjust the position. See section 5 on the back
of this sheet.
Make sure you have a grounded electrical outlet, power strip, or extension
cord to plug MovieMate into.