ACU-RITE 01121 사용 설명서 - 페이지 13

{카테고리_이름} ACU-RITE 01121에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ACU-RITE 01121 16 페이지.

Care and Maintenance

Display Care

Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep

away from dust, dirt and moisture. Clean ventilation ports regularly with a

gentle puff of air.

Outdoor Sensor Care

Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.

The indoor/outdoor temperature and humidity readings, and barometric

pressure can be calibrated on the display unit to improve accuracy. Calibration

can improve accuracy when sensor placement or environmental factors impact

the data accuracy.

1. To access calibration mode, press AND HOLD the "

buttons simultaneously for at least 5 seconds.

2. To adjust the currently selected (flashing) item, press and release the "

or "

" buttons to calibrate the data value higher or lower than the actual

reading.

3. To save your adjustments, press and release the " SET " button to adjust the

next preference. The "

values.

The preference set order is as follows:

OUTDOOR TEMPERATURE

OUTDOOR HUMIDITY

INDOOR TEMPERATURE

INDOOR HUMIDITY

BAROMETRIC PRESSURE (must be set to MANUAL mode to calibrate)*

*To change from AUTO to MANUAL pressure mode and vice versa, press

AND HOLD the "SET" button for 10 seconds. "manual" will appear under

the barometric pressure to indicate that manual mode has been activated.

Press and HOLD the "SET" button for 10 seconds to return to AUTO mode.

After 10 seconds of inactivity, the display will save the adjustments and exit

calibration mode. Note: Calibrations will be erased if the display is reset or if

batteries are removed and the power adapter is unplugged.

" icon will remain illuminated next to calibrated

," " SET ," and "