Cisco WAP300N 사용자 설명서 - 페이지 17

{카테고리_이름} Cisco WAP300N에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco WAP300N 30 페이지.
Cisco WAP300N에 대해서도 마찬가지입니다: 매뉴얼 (9 페이지)

Linksys WAP300N

- OR -

a. Log into the WAP300N's browser-based utility (see "How to open the

browser-based utility" on page 8)

b. Click the Wireless tab, then click the Basic Wireless Settings page

c. For Configuration View, select Wi-Fi Protected Setup™

d. Click the Wi-Fi Protected Setup button in the Wi-Fi Protected Setup

screen

How to connect to a router or access point using the

WAP300N's Wi-Fi Protected Setup PIN

Use this method if your router or access point asks for the WAP300N's PIN

(Personal Identification Number)

To connect a device using the WAP300N's Wi-Fi Protected Setup PIN:

Wireless > Basic Wireless Settings

1. Log into the browser-based utility (see "How to open the browser-based

utility" on page 8)

2. Click the Wireless tab, then click the Basic Wireless Settings page

3. For Configuration View, select Wi-Fi Protected Setup™

4. On the router or access point's browser-based utility, enter the PIN listed

on the WAP300N's Wi-Fi Protected Setup screen It is also listed on the

bottom of the WAP300N In the example below, the WAP300N's PIN is

02743103

The Wi-Fi Protected Setup status, wireless band, network name (SSID),

and security mode are displayed at the bottom of the screen

5. Click OK on the WAP300N's Wi-Fi Protected Setup screen

How to manually set up your WAP300N

You can follow these instructions to connect your WAP300N to your router, or

you can use Wireless Network Site Survey to connect For more information

about site survey, see "How to run a wireless network site survey" on page 12

To manually set up your WAP300N in wireless media connector mode:

Wireless > Basic Wireless Settings

1. Log into the browser-based utility (see "How to open the browser-based

utility" on page 8)

2. Click the Wireless tab, then click the Basic Wireless Settings page

3. For Configuration View, select Manual

4. Configure the following fields:

Network Name (SSID)—The SSID is the name of your wireless network

This network name is shared among all the wireless devices connected

to your wireless network, so the SSID you enter here must match the

router's SSID exactly (the SSID is case-sensitive)

Security Mode—Select the security mode that matches the security

setting on your router or access point If the setting here does not match

the setting on your router or access point, it will not be able to connect

Setting Up: Basics