Sony AZ1-H 서비스 매뉴얼 - 페이지 30

{카테고리_이름} Sony AZ1-H에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony AZ1-H 34 페이지. Lcd digital color tv

2-4. RESETTING THE TV TO FACTORY CONDITION

Use the following instructions to restore the User Adjustments

and Channel Memory settings to the preset factory conditions.

1. While holding down the

press the POWER button on the TV Switch Unit of the set.

The set restarts and displays the Initial Setup screen. This

may take several minutes.

KDL-40NX700/46NX700

on the Remote Commander,

SERVICE ADJUSTMENTS

2-4-1. RESETTING THE TV TO FACTORY CONDITION USING

SERVICE MODE

1. TV must be in Standby Mode. (POWER off).

2. Press the following buttons on the Remote Commander

within a second of each other:

DISPLAY

Channel

3. If necessary, press JUMP or OPTIONS to go to DIGITAL

mode.

4. Press

"SERVICE" changes to green RST.

5. Press MUTING .

RST executes the command and displays EXE.

6. Press

EXE-RST displays green, then red indicating the TV is

writing the data.

When the process is complete the green SERVICE text

displays and the LED display as shown below:

TIMER

8. Cycle AC Power (Unplug and Plug AC Cord from the AC

Outlet).

9. The set restarts and displays the Initial Setup screen.

This may take several minutes.

POWER

Volume

Standby

POWER