Cisco TelePresence System C20 Plus 시작하기 매뉴얼 - 페이지 26

{카테고리_이름} Cisco TelePresence System C20 Plus에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco TelePresence System C20 Plus 32 페이지. Telepresence conference system
Cisco TelePresence System C20 Plus에 대해서도 마찬가지입니다: 사용자 설명서 (44 페이지), 시작하기 매뉴얼 (35 페이지), 시작하기 매뉴얼 (46 페이지)

페이지 인쇄
Cisco TelePresence System C20 Plus 시작하기 매뉴얼
Profile Series, Codec C Series and Quick Set C20 / C20 Plus
Contents
Introduction
Software upgrade
From this page you can do software upgrades and add a
release key and option keys.

Software versions

The C series codecs are using the TC software.
NOTE:
Contact your system administrator if you have
questions about the software version.
Software release notes and upgrade files
Cisco recommends reading the software release notes
before upgrading the software.
Go to:
http://www.cisco.com/en/US/products/ps11422/
tsd_products_support_series_home.html
For upgrade software download go to:
com/cisco/software/navigator.html
Release key
The release key is required to be able to use any of the
released software.
Contact your Cisco representative to obtain the release
key.
Option key
An option key is required to activate any optional
functionality, and you may have several option keys in your
system. The options available are:
•
Natural presenter
•
Premium resolution
•
Multisite (not valid for Codec C20)
•
High definition (only valid for Codec C20)
•
Dual display (only valid for Codec C20/C40)
Contact your Cisco representative to obtain the option
key(s).
Profile Series, Codec C Series and Quick Set C20/C20 Plus Getting Started Guide TC4.1, Feb 2011.
D14639.03
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
Configure your system

The Upgrade Software page

http://www.cisco.
Add the release and option keys
Contact your Cisco representative to obtain the required
key(s). If you will add both a release key and one or more
option keys, the valid procedure will be:
1.
Enter the release key and press Add.
The key format: "1TC001-1-0C22E348" (each system will
have a unique key).
Enter the option key and press Add.
2.
The key format: "1N000-1-AA7A4A09" (each system will
have a unique key).
3.
If you have more than one option key, add the remaining
keys.
Operating devices
The menu system
26
Getting started guide
The web interface
The web interface
Upgrade the software on the codec
4.
Before you can start the upgrade you must download the
software upgrade file. The file format: "s52000tc4_0_0.
pkg" (each software version has a unique file name).
5.
Press Browse... and select the .PKG file.
6.
Press the Upgrade button to start the installation.
7.
Leave the system to allow the installation process to
complete. You can follow the progress on this page.
When the upgrade is successfully completed a message
will appear. The installation process may take up to 30
minutes.
Password protection
www.cisco.com