Argo POLIFEMO DEDALO 사용 설명서 - 페이지 4

{카테고리_이름} Argo POLIFEMO DEDALO에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Argo POLIFEMO DEDALO 11 페이지.

1. Control panel

2. Buttons on control panel

3. Air outlet

4. Dust filter and evaporative panel

The appliance does not need to be installed.

Position the unit on a flat, stable surface and connect the power cord to a suitable power socket (220-240 V~): the

appliance can be switched on using the ON/OFF button and you will hear a sound.

When you move it, use the handle on the back. Do not use this cooler in an area with high humidity, rich in dust or with a

temperature above 40 °C.

This product can be used either as a fan, with 3 modes (Normal, Natural and Sleep) and 3 fan speed options (low,

medium and high), or as a cooler/humidifier: in this case the rear tank should be filled with

not exceeding the maximum level as indicated. When the water in the tank falls below the minimum level, marked on the

tank, LED Low water on control panel will flash to indicate the leak of water.

The fan takes in air from the room and passes it through the dust filter and the evaporative panel, which is constantly

humidified thanks to a system which draws water from the tank and sprays it onto the panel. The incoming hot air makes

part of the water contained in the panel evaporate and is therefore cooler when released back into the room, which makes

it feel as though the temperature has dropped.

V 02/21

DESCRIPTION OF PARTS

5. Water tank

6. Multidirectional wheels

demineralized

water, up to but