Sony Odyssey7Q+ 설정 매뉴얼 - 페이지 9

{카테고리_이름} Sony Odyssey7Q+에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony Odyssey7Q+ 19 페이지. 4k raw
Sony Odyssey7Q+에 대해서도 마찬가지입니다: 설정 매뉴얼 (8 페이지)

4K RAW TO 4K/UHD/2K/HD PRORES 422 (HQ)

FS700 CONFIGURATION

1. SET UP THE FS700 FOR 4K TO UHD OR HD RECORDING

MENU » REC/OUT SET » REC SET » RAW SET

Select any of the following frames rates that you wish to record on Odyssey7Q:

4096x2096/24p

NTSC

4096x2096/30p

4096x2096/60p*

4096x2160/25p

PAL

4096x2160/50p*

*4K to HD Only

Once the selection is made you will need to press EXEC on the camera, to return to live

/ record.

2. SETUP RECORD TRIGGER (FS700 REC BUTTON)

MENU » REC/OUT SET » VIDEO OUT » SDI/HDMI COMMAND » ON

3. SET GAMMA (REQUIRED FOR 4K/HD RECORDING)

PICTURE PROFILE » PP7 » SETTING » GAMMA » S-LOG2

NOTES:

• Picture Profiles S-Log2, Rec709, Rec709 800% are all supported in this mode.*

• Custom Profiles or adjustments to the factory S-LOG2, Rec709, Rec709 800% are not

supported at this time.

• Be sure to set the white balance correctly before shooting. Also note that if you wish to

trigger the Odyssey via the camera's record trigger please set the following on the FS700

• With 4K to 4K/HD what you see on the monitor is what will be recorded.

• Adjusting settings within each picture profile will not be reflected in the recording since

the Odyssey7Q can only detect which profile is set, not the individual attributes.

4. CONNECT FS700 TO ODYSSEY7Q

Connect FS700 3G-SDI output to Odyssey7Q SDIA input

NOTE:

Use only 3G-SDI rated cables from FS700 to Odyssey7Q. Using a 1.5G SDI cable in not

recommended and may cause issues.