Sony SLT-A55L 서비스 매뉴얼 - 페이지 7

{카테고리_이름} Sony SLT-A55L에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony SLT-A55L 30 페이지. Interchangeable lens digital camera/zoom lens kit

Assembly Procedure

Note: Make sure to perform the assembly procedures after assembling the AS Holder Actuator Assy.

The assembly procedure is the reverse of the removal procedure.

Apply grease to the portions indicated below.

* After applying grease, attach the Ball Bearings.

Ball Bearing

G G-15

G G-15 and G G-116

AS Slider B Assy

* After applying grease, attach the Ball Bearings.

Ball Bearing

G G-15

Ball Bearing

G G-15

SLT-A33/A33L/A33Y/A55/A55V/A55L/A55VL/A55VY_L2

1-6. METHOD FOR REPLACING THE AS HOLDER ACTUATOR ASSY

Removal Procedure

Note: Make sure to perform the removal procedures after removing the

AS Slider B Assy.

(1) Remove the solder on the enamel wires at two places.

Solder

(2) Remove the flexible board from the hook on the AS Holder Actuator

Assy.

Hook

(3) Remove the four screws to remove the AS Holder Actuator Assy.

AS Holder Actuator Assy

1-7. GPS RECEIVING CHECK (SLT-A55V/A55VL/A55VY)

After a part of set was replaced or after the set was assembled, check the reception of GPS signal.

1-3

– ENGLISH –

Assembly Procedure

Note: Make sure to perform the assembly procedures before assembling

the AS Slider B Assy.

The assembly procedure is the reverse of the removal procedure.

Apply grease to the portions indicated below.

G G-15 and G G-116

AS Holder Actuator Assy