Cisco ASA 5545-X 소프트웨어 설명서 - 페이지 8

{카테고리_이름} Cisco ASA 5545-X에 대한 소프트웨어 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASA 5545-X 37 페이지. Threat defense reimage guide
Cisco ASA 5545-X에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (13 페이지), 빠른 시작 매뉴얼 (13 페이지), 빠른 시작 매뉴얼 (15 페이지)

페이지 인쇄

Reimage from ASA to Firepower Threat Defense

gateway gateway_ip_address

filepath/filename

set

sync

tftpdnld

The FTD boot image downloads and boots up to the boot CLI.

See the following information:

• interface—(ASA 5512-X, 5515-X, 5525-X, 5545-X, and 5555-X only) Specifies the interface ID. Other

models always use the Management 1/1 interface.

• set—Shows the network settings. You can also use the ping command to verify connectivity to the server.

• sync—Saves the network settings.

• tftpdnld—Loads the boot image..

Example:

Example for the ASA 5555-X:

rommon 0 > interface gigabitethernet0/0

rommon 1 > address 10.86.118.4

rommon 2 > netmask 255.255.255.0

rommon 3 > server 10.86.118.21

rommon 4 > gateway 10.86.118.1

rommon 5 > file ftd-boot-latest.cdisk

rommon 6 > set

ROMMON Variable Settings:

ADDRESS=10.86.118.3

NETMASK=255.255.255.0

SERVER=10.86.118.21

GATEWAY=10.86.118.21

PORT=GigabitEthernet0/0

VLAN=untagged

IMAGE=ftd-boot-latest.cdisk

CONFIG=

LINKTIMEOUT=20

PKTTIMEOUT=4

RETRY=20

rommon 7 > sync

Updating NVRAM Parameters...

rommon 8 > tftpdnld

Example for the ASA 5506-X:

rommon 0 > address 10.86.118.4

rommon 1 > netmask 255.255.255.0

rommon 2 > server 10.86.118.21

rommon 3 > gateway 10.86.118.21

rommon 4 > file ftd-boot-latest.lfbff

rommon 5 > set

ROMMON Variable Settings:

Cisco ASA and Firepower Threat Defense Reimage Guide