Cisco PIX-515E 빠른 시작 매뉴얼 - 페이지 15

{카테고리_이름} Cisco PIX-515E에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco PIX-515E 42 페이지. Security appliance
Cisco PIX-515E에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (42 페이지)

페이지 인쇄

Step 3: Configure External Identity for the DMZ Web Server

The DMZ web server needs to be easily accessible by all hosts on the Internet. This configuration

requires translating the web server IP address so that it appears to be located on the Internet, enabling

outside HTTP clients to access it unaware of the security appliance. Complete the following steps to

map the web server IP address (30.30.30.30) statically to a public IP address (209.165.156.11):

1. Click the Configuration button at the top of the ASDM window. Then choose the NAT feature on

the left side of the ASDM window.

2. Click the Translation Rules radio button. Then click the Add button at the right side of the page.

3. Choose the outside dmz interface from the drop-down menu of interfaces.

4. Enter the IP address (30.30.30.30) of the web server, or click the Browse button to select the server.

5. Choose 255.255.255.255 from the Mask drop-down menu. Then click the Static radio button.

6. Enter the external IP address (209.165.156.11) for the web server. The Advanced button allows

you to configure features such as limiting the number of connections per static entry and DNS

rewrites. Then click the OK button.

7. Verify the values that you entered. Then click the Apply

The configuration should display as follows:

button .