Cisco SCE8000 GBE 구성 매뉴얼 - 페이지 12

{카테고리_이름} Cisco SCE8000 GBE에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SCE8000 GBE 18 페이지. 10gbe platform
Cisco SCE8000 GBE에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (25 페이지), 제거 및 교체 절차 (36 페이지), 설치 (21 페이지)

페이지 인쇄
Cisco SCE8000 GBE 구성 매뉴얼
The Cisco SCE8000 Optical Bypass
Table 2-9
LEDs
Status
Optical Bypass Module Specifications
Fiber Cable Type
The fiber cable type within the Optical Bypass Module area as follows:
•
•
Maximum optical path (fiber length of two ports) is 600m.
Switching Time
Switching time is measured from trigger to stable 90% optical output.
•
•

Fan Assembly

The system fan assembly, located in the chassis, provides cooling air for the installed modules
(Figure
If the air temperature exceeds a preset threshold, the environmental monitor displays warning messages.
Cisco SCE8000 10GBE Installation and Configuration Guide
2-12
Optical Bypass Module LEDs
Description
The Status LED indicates the operational status of the optical bypass
module, as follows:
•
•
OPB-SCE8K-MM: 50 um core.
OPB-SCE8K-SM: SMF-28
Typical switching time: 3 ms
Maximal switching time: 10ms
2-9). Sensors on the fan assembly and within the system monitor the internal air temperatures.
Chapter 2
Green — Bypass module has been de-activated (traffic flows through the
Cisco SCE8000 platform)
Off — Bypass module is active (traffic does not flow through the Cisco
SCE8000 platform)
Introduction to the Cisco SCE8000 10GBE Platform
OL-16478-05