Cisco UCS X10c 설치 및 서비스 매뉴얼 - 페이지 29

{카테고리_이름} Cisco UCS X10c에 대한 설치 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS X10c 38 페이지. Front mezzanine gpu module

Servicing the GPU Module

Step 1

Locate the retaining clips on the filler blank (2, in the illustration). Each side of the filler blank has a retaining clip.

Step 2

Grasping the filler blank by the bracket, align the filler blank with the GPU slot.

Step 3

Holding the filler blank level, slide it into the GPU slot until the retaining clips fit into place behind the sheet metal wall

of the GPU cage (1).

Step 4

Make sure that the tab on the filler bracket sits flush in the GPU slot.

What to do next

Reinsert the GPU cage onto the front mezzanine GPU module.

Replacing a Drive

The front mezzanine GPU module supports up to two U.2 NVMe drives. Each drive is front-loading into the

front of the module.

Use the following tasks to replace a U.2 drive.

•

Removing a Drive, on page 22

Installing a Drive, on page 23

Cisco UCS X10c Front Mezzanine GPU Module Installation and Service Guide

Replacing a Drive

Installing a GPU Cage, on page 16