Cisco UCS X10c 설치 및 서비스 매뉴얼 - 페이지 34

{카테고리_이름} Cisco UCS X10c에 대한 설치 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS X10c 38 페이지. Front mezzanine gpu module

Recycling the PCB Assembly (PCBA)

Each front mezzanine assembly has four printed circuit boards (PCBs) that are connected to the sheet metal

cage by 15 M3 screws.

To remove the PCBs, you must:

• Remove the compute node that contains the front mezzanine module from its chassis

• Remove the front mezzanine assembly from its compute node.

• Disassemble and remove additional parts to gain access to the PCBs.

• Disconnect the PCBs from the sheet metal to recycle them.

• Recycle each front mezzanine assembly in the Cisco UCS X-Series server chassis.

Use the following procedure to recycle the PCBs from the UCS front mezzanine GPU module.

Before you begin

Note

Cisco UCS X10c Front Mezzanine GPU Module Installation and Service Guide

For Recyclers Only! This procedure is not a standard field-service option. This procedure is for recyclers

who will be reclaiming the electronics for proper disposal to comply with local eco design and e-waste

regulations.

Servicing the GPU Module