Cisco C880 M4 하드웨어 설치 매뉴얼 - 페이지 7

{카테고리_이름} Cisco C880 M4에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco C880 M4 23 페이지. System event log collection
Cisco C880 M4에 대해서도 마찬가지입니다: 서비스 보충 설명서 (27 페이지), 운영 매뉴얼 (48 페이지), 빠른 시작 매뉴얼 (2 페이지), 펌웨어 업데이트 매뉴얼 (5 페이지)

페이지 인쇄

*3: There are cases when device is overloaded or when abnormality is detected, FAN rotates at high-speed

even if recommended environmental temperature is used.

*4: Protect from condensation.

*5: Temperature condition changes according to the installation location above sea level.

For 0 to 1000 m (0 to 3281 ft) above sea level, temperature range at the time of installation: 5 to 35°C

(41 to 95°F)

For 1000 to 1500 m (3281 to 4921 ft) above sea level, temperature range at the time of installation: 5 to

33°C (41 to 91.4°F)

For 1500 to 2000 m (4921 to 6562 ft) above sea level, temperature range at the time of installation: 5 to

31°C (41 to 87.8°F)

For 2000 to 3000 m (6562 to 9843 ft) above sea level, temperature range at the time of installation: 5 to

29°C (41 to 84.2°F)

Error of + 100m in the sea level settings of the location of installation is permissible.

*6: Downtime is the condition in which the device is packed and maintained.

*7: Level of noise which is actually heard varies as per the mounting condition of the position from where the

noise is heard or the position of rack.

*8: Level of noise and the level of acoustic power changes according to the Hardware configuration, the

processing load and the environmental temperature.

*9: Downtime is the condition in which the device is installed. However, the power is switched off.

*10: Value at the time of operations.

*11: Value of 1 input cable

*12: Value of 1 device

*13: Interruptible power supply is the built-in PSU (80 PLUS SILVER supported), high efficiency power

supply is the built-in PSU (80 PLUS PLATINUM supported)