Cisco UCS 사용자 설명서 - 페이지 13
{카테고리_이름} Cisco UCS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS 50 페이지. C-series
페이지 인쇄
Chapter 2
Launching UCS Server Configuration Utility
Booting From Virtual KVM Console
Before You Begin
•
To boot the UCS-SCU application using virtual KVM Console, follow these steps:
Step 1
Log in to Cisco IMC from your desktop.
Step 2
Click Launch KVM Console to launch KVM Console.
Step 3
Click the Virtual Media tab.
The Virtual Media tab opens.
Step 4
Click Add Image.
Step 5
Navigate to and select the ISO file and click Open to mount the image.
Step 6
In the Client View section, select the check box in the Mapped column for the ISO file that you added
and then wait for the mapping to complete.
KVM Console displays the progress in the Details section.
Step 7
Reboot the server by clicking Power Cycle Server in the CMC.
Step 8
Press F6 when the server starts to select a boot device.
The boot selection menu appears.
Step 9
Use the arrow keys to select Cisco Virtual CD/DVD and then press Enter.
The server boots using the UCS-SCU image and launches the application in the KVM tab.
Using Physical Media
Before You Begin
•
•
To boot the application on your server using a physical CD/DVD, follow these steps:
Step 1
Connect the USB DVD drive to the server through the USB port.
Step 2
Insert the physical media on to your DVD drive.
Step 3
Restart the server and press F6 to enter the boot selection menu. Select CDROM drive as the boot
device.
The server boots using the UCS-SCU image and starts the application.
Download the UCS-SCU ISO image file from cisco.com. For information on how to download the
image, go to the
"Obtaining ISO Image From cisco.com" section on page
Download the UCS-SCU ISO image file from cisco.com. For information on how to download the
image, go to the
"Obtaining ISO Image From cisco.com" section on page
Create an .iso CD using an application that burns .iso CDs.
Cisco UCS Server Configuration Utility, Release 5.0
Booting UCS-SCU
2-1.
2-1.
2-3