Cisco UCS B22 M3 설치 및 서비스 참고 사항 - 페이지 5

{카테고리_이름} Cisco UCS B22 M3에 대한 설치 및 서비스 참고 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS B22 M3 31 페이지. Blade server
Cisco UCS B22 M3에 대해서도 마찬가지입니다: 업그레이드 매뉴얼 (21 페이지)

페이지 인쇄

DB9 serial connector

Drive Replacement

Each blade has up to two front-accessible, hot-swappable, 2.5-inch drives. Unused hard drive bays should always be covered with

cover plates to ensure proper cooling and ventilation.

You can remove and install hard drives without removing the blade server from the chassis.

The drives supported in this blade server come with the drive sled attached. Spare drive sleds are not available. A list of currently

supported drives is in the specification sheets at this

ucs-b-series-blade-servers/datasheet-listing.html

Before upgrading or adding a drive to a running system, check the service profile in Cisco UCS Manager and make sure the new

hardware configuration will be within the parameters allowed by the service profile.

To prevent ESD damage, wear grounding wrist straps during these procedures.

Caution

Removing a Blade Server Hard Drive

To remove a hard drive from a blade server, follow these steps:

Procedure

Step 1

Push the button to release the ejector, and then pull the hard drive from its slot.

Figure 3: Removing the Hard Drive

2-port USB connector for a mouse and keyboard

URL:http://www.cisco.com/c/en/us/products/servers-unified-computing/