Cisco UCS B440-M1 매뉴얼

{카테고리_이름} Cisco UCS B440-M1에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS B440-M1 12 페이지. Bios policy configuring
Cisco UCS B440-M1에 대해서도 마찬가지입니다: 구성 (8 페이지)

페이지 인쇄

Virtual Interface Adapter in a Service Profile

Scenario

Document ID: 112000

Contents

Introduction

Prerequisites

Requirements

Components Used

Conventions

Background Information

Virtual Interface Adapter in Service Profile

vNIC/vHBA Placement

Service Profile

Hardware Adapter Verification

Create a Service Profile

Manual Virtual Interface Adapter Placement

Related Information

Introduction

The new Cisco Unified Computing System (UCS) Cisco Blade Server B440 M1 allows for Virtual Interface

Adapter placement in UCS Manager (UCSM) service profiles. This is known as Virtual Host Interface

Placement Assignment.

Virtual Host Interface Placement Assignment specifies how vNICs and vHBAs are placed on physical

network interface (mezzanine) cards in a server hardware configuration independent of one another. When a

logical server is associated to a blade, a Virtual Interface Adapter is assigned to a physical adapter.

With the new B440 M1 blade server there are two Virtual Interface Adapters that can assign vNICs/vHBAs to

a specific Virtual Interface Adapter (1 to 2). If a vNIC/vHBA is not assigned to a Virtual Interface Adapter,

the Unified Computing Manager (UCM) applies a default policy based on pci bdf order. Further, UCSM

gives you the ability to customize each individual Virtual Interface Adapter and to create Virtual Interface

Adapter profiles that can be used after server blade implementation or recovery.

Prerequisites

Requirements

Cisco recommends that you have knowledge of these topics:

•

Cisco UCS 5108 Chassis

•

Cisco UCS 6100XP Fabric Interconnet with release 4.1(3)N2

•

Cisco UCS B440−M1 Blade Server

•

Cisco UCSM version 1.3