Cisco UCS C210 M2 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} Cisco UCS C210 M2에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UCS C210 M2 12 페이지. Security manager 4.3

Updates and Service Packs for Windows

The high-end hardware configuration (24 GB RAM, 7 x 500 GB HDD) provides support for 150 devices.

This configuration is suitable for a medium enterprise deployment. The maximum number (cumulative)

of events per second supported is 10,000 events per second [this value is a 9:1 ratio of syslogs to IPS

SDEE (i.e., 9000 syslog + 1000 SDEE)].

Cisco does not recommend (1) attempting to expand the capabilities of the high-end hardware

Note

configuration (24 GB RAM, 7 x 500 GB HDD) by adding licenses or hardware or (2) otherwise

attempting to change the license configuration or hardware or both; the Bundle was tested as shipped.

Updates and Service Packs for Windows

Your new Bundle was shipped to you with current Windows updates installed.

Also, Windows Update was set to "Check for updates but let me choose whether to download and install

them."

Tip

To change the Windows Update setting, select Control Panel > System and Security > Windows

Update > Let me Choose My Settings.

As the administrator of the Cisco UCS Server which forms part of this Bundle, you are responsible for

the necessary updates and service packs for Windows. Cisco does not provide Windows updates or

service packs.

Your new Bundle was shipped to you with current Cisco Security Manager patches and service packs

installed.

Service Pack 1 for Security Manager 4.3 is pre-installed in your new Bundle.

Note

As the admin user of Security Manager installed on this Bundle, you are responsible for the necessary

patches and service packs for Security Manager. Cisco does not install them for you or notify you.

If you have a valid Cisco Service contract, you will be able to upgrade the Cisco Security Manager

software from Version 4.3 to a future version.

Windows:

•

Security Manager admin:

•

Cisco Security Manager 4.3 UCS Server Bundles Quick Start Guide

Default Windows username/password: Administrator/cisco@123

To change the Windows username/password: Follow the procedures published by Microsoft for

Windows Server 2008.

Default Security Manager admin username/password: admin/cisco@123

78-21007-01