Cisco VG202 소프트웨어 구성 매뉴얼 - 페이지 10

{카테고리_이름} Cisco VG202에 대한 소프트웨어 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco VG202 50 페이지. Voice gateways
Cisco VG202에 대해서도 마찬가지입니다: 하드웨어 설치 매뉴얼 (50 페이지), 매뉴얼 (10 페이지), 하드웨어 설치 매뉴얼 (48 페이지), 빠른 시작 매뉴얼 (19 페이지)

페이지 인쇄
Cisco VG202 소프트웨어 구성 매뉴얼

Understanding Cisco IOS Software Basics

•
Understanding Cisco IOS Software Basics
This section describes what you need to know about the Cisco IOS software before you configure the
VG by using the command-line interface (CLI). This chapter includes the following:
•
•
•
•
•
Understanding these concepts will save time as you begin to use the CLI. If you have never used
Cisco IOS software or if you need a refresher, take a few minutes to read this chapter before you proceed
to the next chapter.
For a comprehensive view of Cisco IOS configuration fundamentals, see the
Note
Fundamentals Configuration Guide, Release 12.4
If you are already familiar with Cisco IOS software, proceed to
Facility."

Getting Help

Use the question mark (?) and arrow keys to help you enter commands:
•
•
•
•

Command Modes

The Cisco IOS user interface involves different modes. Each command mode permits you to configure
different components on your VG. The commands available at any given time depend on which mode
you are currently in. Entering a question mark (?) at the prompt displays a list of commands available
for each command mode.
Cisco VG202 and Cisco VG204 Voice Gateways Software Configuration Guide
1-4
10/100BASE-T Fast Ethernet ports are numbered Fast Ethernet 0/0 and Fast Ethernet 0/1, from right
to left.
Getting Help, page 1-4
Command Modes, page 1-4
Undoing a Command or Feature, page 1-5
Saving Configuration Changes, page 1-6
Where to Go Next, page 1-7
For a list of available commands, enter a question mark:
VG> ?
To complete a command, enter a few known characters followed by a question mark (with no space):
VG> s?
For a list of command variables, enter the command followed by a space and a question mark:
VG> show ?
To redisplay a command you previously entered, press the Up arrow key. You can continue to press
the Up arrow key for more commands.
Table 1-1
Chapter 1
Understanding Interface Numbering and Cisco IOS Software Basics
document.
lists the most common command modes.
Cisco IOS Configuration
Chapter 2, "Using the setup Command
OL-16191-01