Epson TM-H6000IIIP 개발 매뉴얼 - 페이지 5

{카테고리_이름} Epson TM-H6000IIIP에 대한 개발 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson TM-H6000IIIP 26 페이지.
Epson TM-H6000IIIP에 대해서도 마찬가지입니다: 개발 매뉴얼 (45 페이지), 개발 매뉴얼 (32 페이지)

페이지 인쇄

Section 2. Details on Settings

This section describes connection configurations and how to make the settings for the

TM-H6000III printer.

2.1 References of Firmware Versions

Please refer to the release notes (Relnote.txt).

2.2 Settings of DIP Switches

Confirm that the following settings have been made correctly.

1) Serial port

DIP-SW1

No.

Setting

It is possible to change the settings of DIP-SW1-1 and DIP-SW1-2, but it is

recommended to leave them OFF.

Set DIP-SW1-3 (Handshake) to DTR/DSR.

Set DIP-SW1-4 (Bit length) to 8 bits.

Set DIP-SW1-5 to DIP-SW1-8 accordance with the port information.

The described set values are the default values. For the details, please refer to

the product manual of the POSPrinter. Also, if these settings are changed, make

sure to change the port information using the SetupPOS utility.

Set DIP-SW2-2 in accordance with whether or not a customer display is

connected.

If connected, set to ON. If not, set to OFF.

OFF

Recommended

OFF

Recommended

OFF

Fixed at OFF

OFF

Fixed at OFF

OFF

Settable

OFF

Settable

OFF

Settable

APPLICATION DEVELOPMENT GUIDE

POSPrinter (TM-H6000III)

DIP-SW2

No.

Setting

OFF

Version 3.00 Feb. 2019

Settable

Fixed at OFF