Epson TM-H6000IIIP 개발 매뉴얼 - 페이지 7
{카테고리_이름} Epson TM-H6000IIIP에 대한 개발 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson TM-H6000IIIP 26 페이지.
Epson TM-H6000IIIP에 대해서도 마찬가지입니다: 개발 매뉴얼 (45 페이지), 개발 매뉴얼 (32 페이지)
페이지 인쇄
Do not change the current settings of DIP-SW2-5 to DIP-SW2-8.
Make other settings in accordance with the settings described above.
4) Ethernet Port
DIP-SW1
No.
Setting
1
2
3
4
5
6
7
8
It is possible to change the settings of DIP-SW1-1 and DIP-SW1-2, but it is
recommended to leave them OFF.
Set DIP-SW2-3 and DIP-SW2-4 to match the environment of use.
Do not change the current settings of DIP-SW2-5 to DIP-SW2-8.
Make other settings in accordance with the settings described above.
2.3 Port Information
1) Port information when serial port is used
The port information that can be set with the SetupPOS utility is as follows.
Baud rate [bps]
Bit length [bit]
Parity
Stop bit [bit]
Handshake
Output buffer length [byte]
Output interval time [ms]
OFF
Recommended
OFF
Recommended
OFF
Fixed at OFF
OFF
Fixed at OFF
OFF
Fixed at OFF
OFF
Fixed at OFF
OFF
Fixed at OFF
OFF
Fixed at OFF
Item
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-H6000III)
DIP-SW2
No.
Setting
1
OFF
2
OFF
3
OFF
4
OFF
5
OFF
6
OFF
7
OFF
8
ON
Setting range
4800, 9600, 19200, 38400
8
NONE, ODD, EVEN
1
DTR/DSR
32 to 1024
0 to 9999
4
Version 3.00 Feb. 2019
Settable
Fixed at OFF
Settable
Settable
Fixed at OFF
Fixed at OFF
Fixed at OFF
Fixed at ON