Epson Continuous Ink Supply System 설치 지침 매뉴얼 - 페이지 7

{카테고리_이름} Epson Continuous Ink Supply System에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Continuous Ink Supply System 8 페이지. For epson stylus photo r200/r210/r300/r310

페이지 인쇄

Please pay attention to the ink level in the reservoirs; if the ink level is below 1CM as the

above picture shown, please use refill kits to fill ink into Reservoir bottles. Carefully pull out

the rubber plugs from the refill holes.(there is possibility of ink spattering. Be careful!) Refill

ink according to the color in short supply. Then put the rubber back

(Please keep the printer

and the reservoir at the same horizontal line during the process of refilling

ink.)

6. How to install the cover of cartridge:

Pls first install the left side of

Then install the other side

Adjust well the joint position

the cover into cartridge-car

Press the right side of cover

Finished

to make it install well

7、Attention for maintenance:

Take out the CISS including the inner cartridges and other components. Then

remove support arm from printer, and place the original cartridges in. Please

inquire local dealer before sending to maintenance.

Notice:

1. Please don't take out cartridge at random after installing the CIS system.