Acuity Brands Lighting KAX LED 설치 지침 - 페이지 4

{카테고리_이름} Acuity Brands Lighting KAX LED에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Acuity Brands Lighting KAX LED 5 페이지.

Installation Instructions

KAX LED

4. Insert the wires through the hole of the key hole slot and

pull them into the pole.

The luminaire is supplied with a clearance slot in the back to

allow wires to be pulled into the pole on existing hole patterns.

5. Thread the second bolt into the bottom threaded hole of

the bar stock plate.

Making sure that no wire are pinched, tighten the two bolts

with a 9/16 socket with to 20-30 ft-lbs (overtightening can

damage components and void warranties).

Make sure that wires are not pinched and tuck excess wire up

into the luminaire mounting area.

Reinstall the mounting door that was removed, hand tighten

these screws, overtighten can cause tread stripping and void

all warranties).

Make wire connections in the pole, observing proper voltage

and polarity. Connect green ground wire from the fixture to

the field ground wire. Secure wires; push back into pole and

replace pole cap.

To rotate the luminaire head:

Loosen the captive screws(KAX1-4; KAX2-6) on the main door

using a 3/16 allen wrench (Figure 6).

Figure 6

Lithonia Lighting Outdoor

One Lithonia Way, Conyers, GA 30012

Phone: 800-279-8041 Fax: 770-918-1209

www.lithonia.com

Figure 4

Figure 5

Locate the rotation feature in the front compartment. Fully

remove the 4 – 1/4" bolts, this will free the head and allow it

to rotate (Figure 7).

Figure 7

Part Number: RJ521393 Rev A

Revision Date: 4/28/16