Epson Stylus Color 660 서비스 매뉴얼 - 페이지 33

{카테고리_이름} Epson Stylus Color 660에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus Color 660 40 페이지. Color ink jet printer
Epson Stylus Color 660에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지), 제품 정보 시트 (4 페이지), 사양 시트 (2 페이지), 제품 정보 시트 (4 페이지), 제품 정보 (11 페이지), 여기에서 시작하기 매뉴얼 (20 페이지)

EPSON Stylus Color 660

5.2.1.9 Bi-D Adjustment

You perform this adjustment to correct differences in printing positions,

which is caused by incorrect printing timing in right and left directions

during the Bi-directional printing. Therefore, you are required to perform

this adjustment after performing the following operations.

Replacing the Print mechanism

Replacing the main board

Replacing the CR motor

Replacing the Carriage Assembly

Replacing g the Printhead

1. Select "Bi-Directional Adjustment" in the adjustment menu (Figure

5-16). The following screen appears.

Figure 5-25. Bi-D Adjustment Menu

Chapter 5

Adjustment

2. Select "Print the Bi-D adjustment pattern" on the screen, and the

screen bellow appears.

Figure 5-26. Print the Bi-D pattern

3. Click OK. The printer starts printing a Bi-D adjustment pattern. (See

the sample pattern in the following page.)

NOTE: As shown in the sample, gaps between passes are

sometimes created in different directions among patterns.

This unexpected change in direction is caused by an ink jet

printer-specific reason, which is an ink jet printer inevitably

performs a periodical cleaning specified by the flashing timer

even during Bi-D pattern printing, so that the printing

direction suddenly changes. However, this directional

difference among Bi-D patterns should not be considered,

and you can always confirm and adjust the pattern correctly

by referring to gap amount only.

Revision A