Epson Stylus Color 900 사용자 설명서 - 페이지 7

{카테고리_이름} Epson Stylus Color 900에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus Color 900 40 페이지. For windows and macintosh
Epson Stylus Color 900에 대해서도 마찬가지입니다: 사양 (2 페이지), 여기에서 시작하기 매뉴얼 (12 페이지), 제품 지원 게시판 (6 페이지), 제품 지원 게시판 (1 페이지), 제품 정보 매뉴얼 (13 페이지), 제품 정보 시트 (4 페이지), 제품 지원 게시판 (3 페이지), 제품 지원 게시판 (2 페이지), 제품 지원 게시판 (4 페이지), 제품 지원 게시판 (7 페이지), 온라인 매뉴얼 (12 페이지)

Epson Stylus Color 900 사용자 설명서
Character table
Character tables contain the characters and symbols used in different
languages. The printer prints text based on the selected character
table. For the available character tables, see "Character Tables" on
page 28.
Auto line feed
When the Auto line feed feature is on, each carriage return (CR) code
is accompanied by a line feed (LF) code. If your printed text is
unexpectedly double-spaced, set this feature to Off. If text lines print
on top of each other, set it to On.
Network I/F mode
If your printer is connected to a single computer, leave this feature
off. If you want to share the printer with another computer, turn this
feature on. When this feature is on, data may be present in the
printer's buffer even though the printer is not printing. Always make
sure the printer does not receive data before turning off the printer.
Loading position
If you want to print more lines on a page, set this feature to 3 mm. If
you set the top margin with your software, that setting is added to
the default-setting value.
0 slash
If you want to use the zero character which has a slash, set this feature
to 0 with slash. The slash allows you to easily distinguish between
an uppercase letter "O" and a zero.
Parallel I/F transfer rate
This setting specifies the interface transfer rate. For most printing,
leave this setting set to Fast. If you encounter problems, set it to
Normal.
7