Motorola APX Mobile 사용 설명서 - 페이지 32
{카테고리_이름} Motorola APX Mobile에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola APX Mobile 46 페이지. Dual-radio o7 control head system
페이지 인쇄
4-2
4.1.3
Control Head ID Error
The APX Dual-Radio only allows the O7 Control Head ID to be set to #1. If the ID is not set as
required, "CH ID# ERR" shall be displayed and the radio is not able to function. User can use the
control head Front Panel Programming feature to change the control head ID.
For setting and changing the Control Head ID Reference, refer to (Section 2.2.2.5, Setting the Initial
Control Head ID) of the APX Mobiles And Control Heads Installation Manual (P/N 6878215A01).
4.1.4
Software Mismatch
Both radios shall have the same firmware version. If the firmware version does not match, the APX
Dual-Radio system shall power up with fatal error, and "SW Mismatch" is displayed along with both
radios firmware versions.
Both radios shall have the same language type. If the language type does not match, the APX
Dual-Radio system shall power up with fatal error, and "Lang Mismatch" is displayed.
4.1.5
General Radio Error
When the radio is turned on (power-up), the radio performs cursory tests to determine if its basic
electronics and software are in working order. Problems detected during these tests are presented
as error codes on the radio's display.
displays.
Table 4-1. APX Mobile Dual-Radio Power-Up Self-Check Error Codes
Error Code
01/02 or 21/02
FLASH ROM Codeplug Checksum
01/12 or 21/12
Security Partition Checksum
01/81 or 21/81
Host ROM Checksum
01/82 or 21/82
FLASH ROM Codeplug Checksum
01/84 or 21/84
External EEPROM blank (or SLIC
failure)
01/88 or 21/88
External RAM
Note: Not a checksum failure
01/90 or 21/90
General Hardware Failure
01/92 or 21/92
Security Partition Checksum
01/93 or 21/93
FLASHport Authentication Code
Failure
01/94 or 21/94
Internal EEPROM blank.
01/98 or 21/98
Internal RAM Fail
01/A2 or 21/A2
Tuning Codeplug Checksum
02/81 or 22/81
DSP ROM Checksum
02/88 or 22/88
DSP RAM
Note: Not a checksum failure
July 30, 2014
Table 4-1
aids in understanding general power-up error code
Description
Troubleshooting: Power-Up Errors
Error Type
Corrective Action
Non-Fatal
Reprogram the codeplug
Non-Fatal
Send radio to depot
Fatal
Send radio to depot
Fatal
Reprogram the codeplug
Fatal
Send radio to depot
Fatal
Send radio to depot
Fatal
Turn the radio off, then on
Fatal
Send radio to depot
Fatal
Send radio to depot
Fatal
Send radio to depot
Fatal
Send radio to depot
Fatal
Send radio to depot
Fatal
Send radio to depot
Fatal
Turn the radio off, then on
MN000770A01-AA