Motorola CP200 사용자 설명서 - 페이지 26

{카테고리_이름} Motorola CP200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola CP200 44 페이지. Portable series
Motorola CP200에 대해서도 마찬가지입니다: 사용자 설명서 (44 페이지), 사양 (2 페이지)

페이지 인쇄
Motorola CP200 사용자 설명서

RECEIVING

1
Turn your radio on.
2
Adjust the radio's volume (see page 23).
3
Switch to the desired channel. To respond,
hold the radio in a vertical position, press the
PTT, and talk at a distance of about 1 to 2
inches (2.5 to 5 cm) from the microphone.

MONITORING

It is important to monitor traffic before
transmitting to ensure that you do not "talk
over" someone who is already transmitting.
1
Press and hold the preprogrammed
Monitor button to access channel traffic.
2
Once channel traffice has cleared, proceed
with your call by pressing the PTT button.
3
A long press of the preprogrammed Monitor
button places the radio in Sticky Monitor
mode.
•
24
English
You hear a high-pitched tone.
A short press of the Monitor button cancels
Sticky Monitor mode and returns the radio to
normal operation.

TRANSMITTING

1
Turn your radio on.
2
Use the Channel Selector knob to select the
desired channel.
3
Hold the radio in a vertical position, press the
PTT, and talk at a distance of about 1 to 2
inches (2.5 to 5 cm) from the microphone.
4
Release the PTT to listen.