aculab MC3 설치 매뉴얼 - 페이지 7

{카테고리_이름} aculab MC3에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. aculab MC3 19 페이지.

Technical Information

4.1

Operating conditions

The MC3 PCI card is designed to operate within an enclosed PC type system with or without

forced air-cooling. The following conditions should be maintained :

Ambient air temperature

Relative Humidity :

Storage and transport

The MC3 PCI card is designed such that its performance will not be degraded after being

subjected to the following conditions during storage or transport while packaged in a suitable

container :

Ambient air temperature

Relative Humidity :

4.2

The MC3 PCI card takes its power from the host computer expansion bus and has the following

power requirements :

5 Amps Max at +5V (dc) ± 5%

It is the user's responsibility to ensure that the host computer will be able to safely supply the

power required by the card in addition to any other auxiliary apparatus drawing power from it.

The card is specified to operate correctly with a tolerance (plus or minus) of 5% on the nominal

dc power supply voltage.

4.3

An MC3 PCI card may be fitted to any computer with a PCI bus. The MC3 switch driver is

designed for use with Microsoft Windows NT4. The host PC must satisfy the minimum

requirement for use with Windows NT4. It is the responsibility of the user and/or application

developer to determine the suitability of any particular system configuration with respect to a

particular application.

zero to 55 degrees Celsius

zero to 70% non-condensing

zero to 100 degrees Celsius

zero to 95% non-condensing

MC3 PCI Card Installation Guide