Motorola GM300 Series 기본 서비스 매뉴얼 - 페이지 22

{카테고리_이름} Motorola GM300 Series에 대한 기본 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola GM300 Series 46 페이지. Professional radio

3-6

6.3

Transceiver Board Removal

Remove the screws securing the diecast cover to the chassis, using the T20 TORX™ driver

as shown in Figure 3-4.

Lift the cover from the chassis.

Slowly lift the transceiver board on the edge at the front of the radio (the edge that mates with

the control head) and pull gently toward the front of the radio as shown in Figure 3-5. Take

care to slide the antenna connector and power connector out of the chassis towards the front.

CAUTION: The thermal grease or pads can act as an adhesive and cause the leads of the heat dis-

sipating devices to be over stressed if the board is lifted too quickly.

Diecast

Cover

Radio

Chassis

Figure 3-4 Diecast Cover Removal.

Antenna

Connector

Figure 3-5 Transceiver Board Removal

Screws (6 on 25W models)

(9 on 60W models)

Lift

MAINTENANCE

ZWG0130212-O

ZWG0130213-O