Motorola XPR 4550 설치 매뉴얼 - 페이지 21

{카테고리_이름} Motorola XPR 4550에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola XPR 4550 45 페이지.

Standard Configurations: Radio Mounting

2.2.1

Dash Mount with Trunnion

1. Select the location to mount your radio on the transmission hump (see

the dash (see

the transmission housing is not affected.

2. Using the trunnion mounting bracket as a template, mark the positions of the holes on the

mounting surface. Use the innermost four holes for a curved mounting surface such as the

transmission hump, and the four outmost holes for a flat surface such as under the dash.

3. Center punch the spots you have marked and realign the trunnion in position.

4. Secure the trunnion mounting bracket with the four self-drilling screws provided (see

Figure 2-6

5. Ensure that the plastic guides are aligned (horizontal) to the grooves of the trunnion. Slide the

radio into the grooves until it snaps into place (see

wing screws provided.

6816812H01

Figure

2-7). When mounting the trunnion on the transmission hump take care

and

Figure

2-7).

Wing Screw

Trunnion

Figure 2-6. Transmission Hump Trunnion Mounting

Trunnion

Wing Screw

Figure

2-6). Secure the radio with the two

Plastic Guides

Tabs

Groove

Threaded Hole

for Wing Screw

Microphone

Wing Screw

2-5

Figure

2-6) or under

Wing Screw

Holes for

S-Hook

March 23, 2006