Motorola CP185 Series 사용자 설명서 - 페이지 18

{카테고리_이름} Motorola CP185 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola CP185 Series 40 페이지.
Motorola CP185 Series에 대해서도 마찬가지입니다: 사용자 설명서 (42 페이지), 일반 사양 (2 페이지)

페이지 인쇄

SCAN

Scan allows you to monitor multiple channels and receive calls

that are transmitted on them.

Two types of scan are supported: Normal Scan and Priority

Scan. Normal Scan searches all channels sequentially in the

radio's scan list, whereas Priority Scan allocates 50% of the

scanning time to the Priority Channel (the first channel in the

designated scan list).

Start

Ch. 2

Ch. 1

Home

Start

Ch. 2

Ch. 1

Channel 1 Prioritized

Home

During scan, when activity is detected that meets the

unsquelch condition, the radio stops scanning and switches to

that channel; the G indicator is illuminated, and the channel

number is displayed. When no activity is detected for a pre-set

time, the radio resumes scanning.

English

Ch. 3

Ch. 4

Normal Scan

Ch. 16

Ch. 15

Ch. 3

Ch. 1

Priority Scan

Ch. 1

Ch. 16

If your radio has switched to a non-priority channel during

priority scan, it still checks for activity on the priority channel. If

activity is detected there, the radio switches to the priority

channel.

The radio transmits on the Home Channel, if PTT is pressed

during scanning. If the radio stops scanning, and changes to a

particular channel, all transmit and receive activity is

performed on that channel.

• Press the Scan button to begin channel scanning. The G

indicator blinks to indicate that the radio is scanning. The

LCD screen shows the Home Channel where the scan

began.

• Press Scan button to stop scanning.

Deleting a Nuisance Scan Channel

Ch. 14

A channel with unwanted activity is called a Nuisance

Channel. You can remove a Nuisance Channel from the scan

list temporarily. To remove a Nuisance Channel

• Press the Nuisance Channel Delete programmable button,

when your radio stops on a Nuisance Channel. A high-

pitched tone is heard.

You cannot remove the Home or Priority Channel from the

Ch. 1

scan list. If attempted, a low-pitched tone is heard, and no

action is taken.

To reinstate the deleted channel(s) into the scan list, restart

scan, or simply turn off your radio and turn it on again.