Acumen BASIX 사용 설명서 - 페이지 8
{카테고리_이름} Acumen BASIX에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acumen BASIX 8 페이지.
Acumen BASIX에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지)
페이지 인쇄Time Mode
Setting the time
1. From Time Mode press
and hold the MODE/SET
button to enter the Time
Setting Mode.
2. Hour (blinking)
- set by using the RESET
button.
- Press the MODE/SET
button to proceed to the
next item.
3. Minutes (blinking)
- set by using the RESET
button.
- Press the MODE/SET
button to proceed to the
next item.
4. 12/24hr. Time display
(blinking)
- set by using the RESET
button.
- Press the MODE/SET
button to proceed to the
next item.
5. Daily alarm (blinking)
- set ON or OFF with the
RESET button.
- Press the MODE/SET
button to proceed to the
next item.
6. Alarm hour (blinking)
- set by using the RESET
button.
- Press the MODE/SET
button to proceed to the
next item.
8
7. Alarm minutes
- set by using the RESET
button.
- Press the MODE/SET
TZ
button to proceed to the
next item.
8. Smart Lite (Blinking)
- set ON or OFF with the
RESET button.
TZ
This feature activates the
night light between 6AM
& 6 PM with any button
pressed. Setting it off will
conserve the battery life.
- Press the MODE/SET
button to exit the setting
TZ
mode.
Heart Rate Mode
Heart Rate - From Time mode click MODE/SET
button once to go to Heart Rate mode and
TZ
begin your exercise.
If your transmitter is correctly attached, the
running man indicator on the watch display
should begin to blink and your current heart
rate in beats per minute will come up on the
display.
TZ
If no heart rate is detected for 5 minutes, the
heart rate circuit will switch itself off. The " "
indicator tells if the heart rate circuit is on. To
switch it back on after it has shut off, simply
restart the Heart Rate mode by clicking the
MODE/SET button.
TZ
(blinking)
TZ
TZ
Cycle
TZ
9