Epson FX-1180 - Impact Printer 제품 정보 - 페이지 13

{카테고리_이름} Epson FX-1180 - Impact Printer에 대한 제품 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson FX-1180 - Impact Printer 17 페이지. Epson serial impact dot matrix printers
Epson FX-1180 - Impact Printer에 대해서도 마찬가지입니다: 설정 매뉴얼 (33 페이지), 브로셔 및 사양 (24 페이지), 빠른 참조 매뉴얼 (16 페이지), 매뉴얼 (11 페이지), 사양 (2 페이지), 매뉴얼 (18 페이지), 사양 (2 페이지), 제한 보증 (1 페이지), 참조 매뉴얼 (34 페이지), 빠른 매뉴얼 (33 페이지)

페이지 인쇄

6. Hold the ribbon cartridge by its handle and push it firmly

down into position; then press down both ends of the

cartridge to fit the plastic hooks into the slots.

7. Use a pointed object, such as a ball point pen, to guide the

ribbon between the print head and ribbon guide while you

turn the ribbon-tightening knob to help feed the ribbon

into place.

8. Slide the print head from side to side to make sure it moves

smoothly.

9. Install the paper tension unit by placing it on the printer's

mounting pegs and lowering it into place. Press down both

ends of the unit until it clicks into place.

10. Replace the printer cover.

Clearing Paper Jams

1. Press the

Operate

2. Remove the printer cover.

3. If continuous paper is jammed in the printer, tear off the

fresh supply at the perforation nearest the paper entry slot.

4. Turn the knob on the left side of the printer away from you

to eject the paper in the printer.

Caution:

Always turn off the printer before you use the knob;

otherwise the printer may be damaged or the top-of-

form or tear-off position may be lost.

5. Remove any remaining pieces of paper. If the paper is stuck

where the printer ejects it, gently pull the paper out of the

printer.

6. Replace the printer cover and press the

turn on the printer. Make sure the

flashing and the

Pause

Using the Default-Setting Mode

The default settings control many printer functions. While

you can often set these functions through your software or

printer driver, you may sometimes need to change a default

setting from the printer's control panel using the default-

setting mode.

The following tables summarize the default-setting mode

settings and options. The factory settings are bold.

11/98

EPSON FX-880/FX-1180

button to turn off the printer.

Operate

Paper Out

light is off.

EPSON FX-880/FX-1180

button to

light is not

- 13