Philips WT121XB 사용자 설명서 - 페이지 33

{카테고리_이름} Philips WT121XB에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips WT121XB 36 페이지. Applied rfid

페이지 인쇄

15.0.0 ACCESSORY (Optional)

15.1.0

Docking Station WD121 series

15.1.1

Product configurations:

WD121

• Docking Station (see Fig. 1-2)

WD121P-M

• Docking Station (see Fig. 1-2)

• AC Power Adapter (Medical grade)

• Power Cord set (EU, UK and US cords)

15.1.2

Hardware Installation

To use the Docking Station, connect it to power through its AC adapter.

The ProScribe can be docked and undocked both in OFF and ON status.

To dock the ProScribe, keep it in vertical position and align the PHILIPS logos in such a way the one on the ProScribe is

aligned around 1 cm on the left of the Docking Station one.

Gently release the ProScribe in the Docking Station; 2 plastic frames will drive the ProScribe in the correct position.

When the ProScribe is docked, the green led on the front of the Docking Station will light on.

The ProScribe front led will turn to yellow, indicating the battery is charging; when full charge is reached, the led will

turn to green.

15.1.3

Software Installation

The ProScribe (Xpe version), comes with the Docking Station driver devices (10/100 Ethernet RJ45 port and USB 2.0

ports) already installed; the relevant drivers will be activated when you dock the ProScribe and deactivated when you

undock it.

Docking Station (Front view)

USB

Docking LED

WT11

USB

Fig. 33a

Docking Station with ProScribe

WD121P

• Docking Station (see Fig. 1-2)

• AC Power Adapter (ITE grade)

• Power Cord set (EU, UK and US cords)

WD1212

• 2 x Docking Station (see Fig. 1-2)

Docking Station (Back view)

connector PAD

ProScribe

Docking Station

adapter connector

USB

RJ-45

Network connector

Fig. 33b

Fig. 33c

AC/DC