Toshiba HD-D3 - HD DVD Player 소유자 매뉴얼 - 페이지 21
{카테고리_이름} Toshiba HD-D3 - HD DVD Player에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba HD-D3 - HD DVD Player 48 페이지. Hd dvd player
Toshiba HD-D3 - HD DVD Player에 대해서도 마찬가지입니다: 사양 (2 페이지)
페이지 인쇄
D: Audio output
15
Press
/
to select "Audio", then press OK.
SETUP MENU
Picture
Audio
Language
Ethernet
General
16
When you connected an audio system to the BITSTREAM/PCM jack ( page 16):
Press
/
to select "Digital Out SPDIF", then press OK.
Digital Out SPDIF
Bitstream
PCM
When you connected an HDMI device to the HDMI OUTPUT jack ( page 15, 16):
Press
/
to select "Digital Out HDMI", then press OK.
Digital Out HDMI
Auto
PCM
Downmixed PCM
17
Press RETURN or
_ H D - A 3 K U _ E n g . i n d d 2 1
Digital Out SPDIF
Digital Out HDMI
Dynamic Range Control
Dialog Enhancement
Select one of the followings according to your connection, and press OK.
Bitstream
When an AV receiver or processor equipped with built-in Dolby Digital, DTS or MPEG
decoder is connected to this player.
When you play a disc recorded in Dolby Digital Plus or Dolby TrueHD format, Dolby Digital sound is
output. When you play a disc recorded in DTS-HD format, the sound is converted to a DTS bitstream. If
the AV receiver or processor does not support DTS, select "PCM".
PCM
When a 2ch digital stereo amplifi er is connected to this player.
When you play an HD DVD or DVD video disc recorded in Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS or DTS-HD format, sound is converted into PCM (2ch) format.
Select one of the followings according to your connection, and press OK.
Auto
When an HDMI device equipped with built-in Dolby Digital, DTS, MPEG or linear PCM
decoder is connected to this player.
When you play a disc recorded in Dolby Digital Plus, Dolby TrueHD or DTS-HD, PCM is output (core only
for DTS-HD).
When you play a disc recorded in Dolby Digital or DTS format, digital audio signal (bitstream audio) is
output. If a connected HDMI device does not support Dolby Digital, DTS or MPEG, sound is converted
into linear PCM to output.
PCM
When an HDMI device which has multi channel input is connected to this player.
When you play an HD DVD or DVD video disc recorded in multi channel in Dolby Digital, Dolby Digital
Plus, Dolby TrueHD, DTS or DTS-HD format, the sound is decoded and output in multi channel in linear
PCM format.
Downmixed PCM
When a 2ch digital stereo AV receiver or processor is connected to this player.
When you play a DVD video disc recorded in Dolby Digital, DTS, MPEG1 or MPEG2 format, sound is
converted into PCM (2ch) format to output.
Note
• Setting "Auto" or "PCM" will reduce output level of multi channel sound from the ANALOG AUDIO OUTPUT
jacks and the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack if you:
– view the playback picture on an HDMI TV connected to this player.
– play an HD DVD video disc of a certain type, recorded in linear PCM format.
In this case, the output level will be restored by setting to "Downmixed PCM".
to return to the menu of step 1.
Bitstream
Auto
Auto
Off
21
7 . 8 . 2
4 : 4 : 3 P M