Pioneer DEH-8300SD 운영 매뉴얼 - 페이지 9

{카테고리_이름} Pioneer DEH-8300SD에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer DEH-8300SD 28 페이지. Cd rds receiver

페이지 인쇄

Operating this unit

Using radio text

Displaying radio text

You can display the currently received radio text and

the three most recent radio texts.

1 Press and hold DISP/

text.

! You can cancel radio text display by pressing

DISP/

/SCRL, TA/NEWS, SRC/OFF or BAND.

! When no radio text is received, NO TEXT ap-

pears in the display.

2 Push M.C. left or right to recall the three most re-

cent radio texts.

3 Push M.C. up or down to scroll.

Storing and recalling radio text

You can store data from up to six radio text transmis-

sions to the RT Memo 1 to RT Memo 6 keys.

1 Display the radio text you want to store in the

memory.

2 Press

(list).

The preset screen is displayed.

3 Use M.C. to store the selected radio text.

Turn to change the preset number. Press and

hold to store.

4 Use M.C. to select the desired radio text.

Turn to change the radio text. Press to select.

! To return to the ordinary display, press BAND/

ESC or

(list).

! The tuner automatically stores the three lat-

est radio text broadcasts received, repla-

cing the oldest text with the newest text.

/SCRL to display radio

Advanced operations using

special buttons

Receiving traffic announcements

Regardless of the source you are listening to, you can

receive traffic announcements automatically with TA

(traffic announcement standby).

1 Tune in to a TP or enhanced other network's TP

station.

2 Press TA/NEWS to turn traffic announcement

standby on or off.

3 Use M.C. to adjust the TA volume when a traffic

announcement begins.

The newly set volume is stored in the memory

and will be recalled for subsequent traffic an-

nouncements.

4 Press TA/NEWS while a traffic announcement is

being received to cancel the announcement.

The tuner returns to the original source but re-

mains in the standby mode until TA/NEWS is

pressed again.

Using news program interruption

When a news program is broadcast from a PTY code

news station, the unit automatically switches to the

news broadcast station. When the news program

ends, reception of the previous program resumes.

1 Press and hold TA/NEWS to turn news program

interruption on or off.

A news program can be canceled by pressing TA/

NEWS.

Storing the tag information to this unit

1 Press TAG/S.Rtrv.

Local seek tuning

1 Press

/LOC to select the desired setting.

FM: Level 1—Level 2—Level 3—Level 4

MW/LW: Level 1—Level 2

The highest level setting allows reception of only

the strongest stations, while lower levels allow

the reception of weaker stations.

Function settings

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select FUNCTION.

Turn M.C. to select the function.

After selecting, perform the following proce-

dures to set the function.

Section