Pioneer AVH-P6400CD 설치 매뉴얼 - 페이지 10

{카테고리_이름} Pioneer AVH-P6400CD에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer AVH-P6400CD 40 페이지. Pioneer avh-p6400: install guide

Installation

Note:

• Before finally installing the unit, connect the

wiring temporarily, making sure it is all connect-

ed up properly, and the unit and the system work

properly.

• Use only the parts included with the unit to ensure

proper installation. The use of unauthorized parts

can cause malfunctions.

• Consult with your nearest dealer if installation

requires the drilling of holes or other modifica-

tions of the vehicle.

• Install the unit where it does not get in the dri-

ver's way and cannot injure the passenger if there

is a sudden stop, like an emergency stop.

• Do not place the display in a position where it

will impede the driver's visibility or affect the

operation of your vehicle's air bags.

• The semiconductor laser will be damaged if it

overheats, so don't install the unit anywhere hot

— for instance, near a heater outlet.

This unit can be properly installed either from "Front" (conventional DIN Front-mount) or

"Rear" (DIN Rear-mount installation, utilizing threaded screw holes at the sides of unit

chassis). For details, refer to the following illustrated installation methods.

Installation with the rubber bush

1. Remove the frame. (Fig. 9)

• If installation angle exceeds 30° from horizontal,

the unit might not give its optimum performance.

(Fig. 8)

Frame

Pull out to remove the frame.

(When reattaching the frame, point the

side with a groove downwards and

attach it.)

30°

Fig. 8

Fig. 9