Pioneer PDP-504CMX 명령 참조 매뉴얼 - 페이지 13

{카테고리_이름} Pioneer PDP-504CMX에 대한 명령 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer PDP-504CMX 18 페이지. Pioneer 3rd, 4th % 5th generations plasma panel quick reference parts lists
Pioneer PDP-504CMX에 대해서도 마찬가지입니다: 브로셔 및 사양 (8 페이지), 빠른 참조 부품 목록 (12 페이지)

페이지 인쇄

RS-232C Adjustment Mode

5.5.6 GET Commands

What are GET commands?

• They are commands for outputting TXD such as adjustment data from the internal microcomputer of the plasma

display to a PC.

• Adjustment data and the like is output in ASCII code.

Note

Command names are given inside brackets < >.

• Data output format

STX (02hex)

Data

Notes

• A GET command is invalid when no ID No. is assigned to the set.

• A GET command is invalid when a wildcard (*) is used in the ID No. when sending the command.

1) <GST> (GET STATUS)

Order

Data Contents

Display data

Power data

Input function data (main)

Input function data (sub)

Screen size data

2-screen display

FUNCTIONAL LOCK data

Dummy data

Temperature data 2

Temperature data 3

Serial

Dummy data

HOURMETER

Check sum

Display data

Power data

Screen size data

NOTE 1) During standby and immediately after POWER ON, the proper value is not output. In this case, wait a moment

after the POWER ON, then get the data. The temperature data is output as a reference (the values are not

guaranteed values). Normally, refer to temperature data 3.

NOTE 2) During standby and during 1-screen display, dummy data (symbol) is output.

NOTE 3) During standby and during 1-screen display the values stored in memory for the product are output.

Data

····

Size

3 Byte

See below

3 Byte

See below (The third character is sub input.)

3 Byte

Input data when GST is received (INPUT1 to 5 is displayed as IN1 to 5.)

3 Byte

Sub input data when GST is received

(INPUT 1 to 5 is displayed as IS1 to IS5.)

1 Byte

See below

1 Byte

0: OFF (1 screen)

3: PinP (upper right) 4: PinP (upper left)

6: PoutP

1 Byte

0: LOCK OFF

3: IR&BUTTONS LOCK

3 Byte

(3-digit number)

3 Byte

(Internal temperature: Reference value) °C

3 Byte

(External temperature: Reference value) °C

15 Byte

3 Byte

(3-digit number)

3 Byte

5 Byte

Displays the time.

2 Byte

First character Generation data: 4 (fixed)

Second character Inch data: 4 (43 inch), 5 (50 inch)

Third character Destination data: M (fixed)

First character Power state & signal state

Second character PN (POWER ON & normal signal input)

PL (POWER ON & no input)

PO (POWER ON & OUT OF RANGE signal input)

SN (Normal standby)

SW (Standby by POWER MANAGMENT)

SS (Standby by SD or PD)

Third character Sub input signal state during multi-screen display

N (Normal signal input) L (No input)

O (OUT OF RANGE signal input)

First character 0; Dot by Dot or PARTIAL 1; 4 : 3 2; FULL or FULL1080i

3; ZOOM 4;CINEMA 5;WIDE 8;FULL1035i 9; UNDERSCAN

Data

Checksum

ETX (03hex)

Remarks

1: 2-SCREEN

1: BUTTONS LOCK

4: MEMORY LOCK

Note 3)

2: PinP (lower right)

5: PinP (lower left)

2: IR LOCK

Note 1)

Note 2)