ABB FMBA-01 사용자 설명서 - 페이지 11

{카테고리_이름} ABB FMBA-01에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB FMBA-01 16 페이지. Modbus adapter module

Mechanical installation

WARNING! Follow the safety instructions given in this manual and

the drive documentation.

The FMBA-01 Modbus Adapter module is to be inserted into its

specific position in the drive. The module is held in place with

plastic pins and one screw. The screw also provides the earthing

of the fieldbus cable shield connected to the module.

On installation of the module, the signal and power connection to

the drive is automatically made through a 20-pin connector. (All

drives do not use all the available signals so the connector on the

drive may have fewer pins.)

Mounting procedure:

• Insert the module carefully into its position on the drive.

• Fasten the screw.

Note: Correct installation of the screw is essential for fulfilling the

EMC requirements and for proper operation of the module.

Mechanical installation